825 L ST , ANCHORAGE AK 99501
The most recent inspection found no violations at all. The prior visit had a minor sanitizer concentration issue that was corrected immediately on-site, and there's no sign of ongoing food safety problems like pests, contamination, or improper holding temperatures.
The most recent inspection found no violations at all. The prior visit had a minor sanitizer concentration issue that was corrected immediately on-site, and there's no sign of ongoing food safety problems like pests, contamination, or improper holding temperatures.
The only issue found was a sanitizer solution that was slightly under the ideal concentration, and it was immediately corrected on-site during the inspection. There's no evidence of temperature abuse, contamination, or pest issues, and the most recent opening inspection had no violations at all.
No violations noted.
A chemical sanitizer used in a sanitizing solution for a manual or mechanical operation shall be used as follows: Chlorine = 100 ppm if water is 55°F or less Chlorine = 50 ppm if water is 75°F or less Chlorine = 25 ppm if water is 120°F or less A quaternary ammonium compound shall be used in accordance with the manufacturer label. An iodine solution shall be least 12.5 ppm and not more than 25 ppm. AMC 16.60.150(4-501.114) **OBSEVED CHEMICAL SANITIZING SOLUTION (CHLORINE-BASED) THAT MEASURED W/THIS INSPECTORS TEST KIT TO BE AT 25PPM-50PPM CONCENTRATION. THE CHEMICAL SANITIZING SOLUTION WAS REMADED WHILE THIS INSPECTOR WAS PRESENT. NEW CHEMICAL SANITIZING SOLUTION MEASURED AT 50PPM-100PPM. CORRECTED ON-SITE.
No violations noted.